Product Introduction A granito-like effect coating is produced by using silicone resin and water-based polyurethane resin. The water-based liquid base material is made into a thick slurry through granulation, which is then cut into small water-based liquid color particles in a water-based protective colloid. Finally, the water-based liquid color particles of various colors are mixed to create a granito-like effect coating. It is non-toxic, odorless, low-VOC, lightweight and safe, weather-resistant, stain-resistant, washable, acid-resistant, alkali-resistant, provides elasticity, crack resistance and all-weather decoration and maintenance. Lightweight and safe, it offers a more environmentally friendly and efficient architectural design solution beyond high-end building exterior stone and tiles, making it the best choice for high-end building exterior decoration.


Product Features ● Pure water-based formula, meeting environmental protection requirements and free from radiation pollution.
● Realistic granite and marble effects, elegant and luxurious, with strong texture and distinct personality.
● High weather resistance, with a service life of over 15 years. It is waterproof, crack-resistant, UV-resistant, stain-resistant, washable, acid rain-resistant, does not peel off or fade, and has a unique self-cleaning property.
● Easy to apply, with a variety of colors, single-gun spraying, and one shot of multiple colors.
Low cost and high economic benefits.


Construction technology
It is equipped with a dedicated sealing primer and water-based polyurethane topcoat. It is recommended to use our company's series of products from primer to topcoat. The spray gun used for construction should be our company's spray gun.
Before formal spraying, experimental spraying should be conducted first according to different coating decorative effects to confirm the pressure and the nozzle diameter of the spray gun. If it is considered that the viscosity of the coating is too high, a special stone-like paint accessory should be used to dilute it to ensure uniform spraying. The pressure of the spray gun, the diameter and the viscosity of the coating will all affect the actual effect. The special topcoat must be applied only after the intermediate coat is completely dry; otherwise, it will affect the film-forming performance of the topcoat and the overall construction effect. It is recommended to apply the topcoat by spraying.


Construction Precautions The Roman Columns, Windows and decorative lines are made with two-component exterior wall putty powder.
Two coats of primer for stone-like paint should be applied. The special sealing paint for stone-like paint must not be missed. If the primer for stone-like paint is applied by spraying, it should be sprayed evenly and the amount of water added for thinning should be consistent.
· Grid line description: Design specifications based on the height and width of the wall, and rationally divide the lines. After dividing the lines, apply water-based black paint and then stick on special tape.
When applying the intermediate coat of the stone-like paint, a spray gun should be used. It is recommended to spray a small sample first before large-scale spraying. After the intermediate coat is sprayed, the adhesive tape should be removed immediately.
If the construction has a rough surface effect, a layer of granite relief bone slurry should be sprayed.
Please strictly follow the series matching of the product for standardized construction.
The temperature should not be lower than 8°C, and the relative humidity should not exceed 85%. It is not advisable to carry out the operation in rainy, snowy or high-temperature weather.
The storage environment should not be lower than 5° C. If it is higher than 40°C, it should be placed in a cool place.