Product application: Suitable for coating on sun-exposed surfaces of storage tanks, pipelines, and large outdoor equipment in the petroleum, natural gas, and chemical industries. According to the national standard GB11174-89, the ambient surface temperature of liquefied petroleum gas tanks, light oil tanks, and chemical light low-boiling-point substance storage tanks should not exceed 50℃ in summer. The temperature in Northeast China should not exceed 45℃. The high temperature of iron sheets mainly comes from the heat caused by sunlight. To lower the surface temperature of iron sheets, the conventional method is to use spray water for cooling, but the effect is not satisfactory, it wastes water and electricity resources, pollutes the environment and corrodes the iron sheets. Choosing to use building reflective heat insulation and waterproof coatings is the best solution to various problems caused by sunlight.
Product Features: Unlike traditional heat insulation materials, building reflective heat insulation waterproof coating can block over 90% of the solar radiation heat from the outer surface of iron sheet buildings, fundamentally eliminating the heat factor caused by sunlight on iron sheets. It is the most ideal cooling and heat insulation solution for chemical storage tank buildings during strong sunlight seasons.
Create an economical and safe inner environment for iron sheets. The high temperature caused by sunlight leads to a significant increase in the internal atmospheric pressure of the sealed iron sheet, and the relative safety factor is also greatly reduced. At the same time, the long-term high-pressure state also has a certain impact on the service life of the iron sheet. If the gas is released to reduce the pressure, the light material oil tank will breathe, and the evaporation of oil gas or chemical substances will cause resource waste and environmental pollution. The application of building reflective heat insulation and waterproof coatings to eliminate the disturbance of high temperatures is of great significance in terms of economy and safety.
An unimaginably low investment Compared with other insulation solutions, the materials and construction costs of building reflective insulation waterproof coatings are both very low.
Potential huge energy-saving benefit returns If a spray device is used to protect the iron sheet from the high temperature caused by sunlight, the accumulated electricity and water charges are often not a small amount. After applying building reflective heat insulation and waterproof coating on the tank surface, such expenses can be completely eliminated.
Environmentally friendly and pollution-free, with guaranteed confidence in use. Building reflective heat insulation and waterproof coating is an environmentally friendly water-based coating. It has been tested by the National Chemical Building Materials Testing Center and meets the standard requirements. The product is non-toxic, odorless, tasteless, non-radioactive and free of heavy metal components.
Protect the metal layer of the iron sheet and extend its service life. Building reflective heat insulation waterproof coating has excellent waterproof effect. After being applied to the outer surface of iron sheet, it can effectively slow down the process of metal oxidation and rusting, and extend the service life.
Building reflective heat insulation waterproof coating is a water-based coating specially developed for chemical plants, oil refineries, oil depots and gas stations. It can also be used to heat the surface of pipeline pearl tiles. It has excellent waterproof and thermal insulation performance, with a temperature resistance of up to 150℃. During the hot summer, it can prevent the temperature rise of the oil tank surface caused by sunlight, and the cooling range can reach 8-30℃. Therefore, it greatly reduces the evaporation of light oils such as gasoline, diesel, kerosene, and chemical oil due to heat, and can effectively prevent water and prevent the oxidation and rusting of the oil tank. This product can extend the service life of the oil tank by 5 to 10 years. After coating the oil tank with this product, the coating is valid for 5 years.
Technical specifications:
1. State: Gel-like liquid 2. Whiteness: 85 3. Coating appearance: White matte 4. Thermal reflectance: ≥90% 5. Solid content: ≥50% 6. Thermal insulation: 0-50℃ 7. Water resistance: 100%, no bubbling (tested 72 hours after construction) 8. Corrosiveness: None 9. Membrane hardness: 2H 10. Scrub resistance: ≥500 times 11. Coating rate: 3-4 square meters per kilogram Construction requirements: 1. Brushing, roller coating and spraying are all acceptable. 2 Before construction, remove the dust adhering to the target surface. 3 It is recommended to dilute it with 10% clean water, stir well and then apply. 4 It is advisable to have a 4-hour interval between the first and second construction steps. 5 The construction environment temperature should be above 10℃ and the relative humidity below 85%.
Note: This product does not have a professional anti-rust function. If the metal material already has severe rust, it is recommended to carry out special anti-rust treatment first, and then follow the normal construction method of the product.
Special Note:
1. The substrate should be flat and clean. If the surface is too dry, spray it with clean water to moisten it before construction. 2 It must be stirred evenly before construction. 3 The validity period of the paint is 2 years. If the paint is left for a long time, it may stratify. Mixing it well before application will not affect the quality. 4 Rain is strictly prohibited within 3 hours after construction. 5 After construction, tools should be washed and dried in time before they are completely dry; otherwise, they will solidify and become unusable. 6 This product is non-toxic. If it accidentally splashes into the eyes, rinse immediately with clean water.